Because each trade leaves conditions the next one inherits, and a finished surface put in too early becomes the work area for whatever comes after it. On a project that touches both the house and the yard, the work runs from the ground up and from rough to finished, and holding that order is the general contractor's job.
Demolition and any concrete break-out come first, because they decide what is left to build on. Grade, footings, slabs and walls follow. Anything that has to pass under a slab, a patio or a driveway, such as utility sleeves or a trade line, goes in before the pour, because afterward the only way under concrete is to cut it.
The outside of the house is closed before the inside is finished. The roof, the stucco and the openings come ahead of drywall, tile and flooring, because El Paso's rain is concentrated in the monsoon: about 53 percent of the 8.70 inch period-of-record mean falls July through September (National Weather Service), and one storm through an open roof can ruin a new floor. Stucco is left to cure before paint goes on it.
Wet work gets the cooler part of the year where the calendar allows. Concrete, mortar and stucco have to hold their water long enough to cure, and El Paso averaged 26 days a year at 100 degrees or more over 1991 - 2020 (National Weather Service), so Sage schedules exterior wet work around the hottest weeks when it can and moves interior finish work into the summer.
Metal follows masonry, and the yard goes last. Iron rails, gates and fence panels are measured from the wall, column or opening as it was actually built, not from the drawing. Rock, turf and planting go in after the concrete trucks, scaffolding and material deliveries are gone, because a finished yard laid early tends to get driven over, stained or buried.
Sage sets that order and coordinates the schedule before work starts, so the trades are not negotiating it with each other on site, and the four Sage Standards (Written Scope, Changes You Approve, Photo Updates and Permits for Our Scope) apply to Sage's own work on every job, while trade work carries its own permits.